Skip to content

Something has stopped working

BBQ repair for grills worth keeping

BBQ and grill repair at your home, across San Diego County and from Temecula up to Hemet. We find the fault and give you a price before anything gets fixed. Built-in or freestanding, with parts from more than 100 vendors.

Send a photo for a price Call (858) 605-5777

7,000+repair jobs since 2015 Price firstbefore any work At your homenothing to haul 5.0 from 200+ Google reviews
A technician lifting a burnt-out burner from a built-in grill

An old burner coming out

What is your grill doing wrong?

Pick the symptom. The drawing shows where we look first.

Not on the list? Send a photo We will tell you what it is, free
Hood Hood handle Rotisserie Warming rack Firebox Cooking grates Heat plates, briquettes Burners Venturi tubes, air shutters Drip pan Knobs, faceplate Igniter Shelf Control valves, orifices Gas line, regulator Crawl space

Pick what it is doing, then point at a part.

It will not light

Usually the ignition: a dead battery, a cracked electrode or a failed module. Sometimes it is a blocked orifice or a spider web in the tube, which a cleaning clears.

Uneven heat or cold spots

Burner ports clog and rot from the inside, and heat plates burn through. We clear what can be cleared and replace what cannot.

Low flame on every burner

Most often the regulator, tripped or failed. We test it under pressure before anything gets replaced.

You can smell gas

Shut it off at the supply and call us. Lines, fittings, valves and the regulator get leak-tested before anything else happens.

Parts rusted through

Burners, heat plates, grates and briquette trays are all replaceable, including for brands that stopped making them. We source from more than 100 vendors.

Knobs, lights or rotisserie dead

Seized valves, broken knobs, failed lighting and rotisserie motors. Small parts, usually one visit.

A guide to the usual causes, not a diagnosis. That happens at the grill.

You see the price before we pick up a tool

  1. Diagnose

    At the grill, with it apart if it needs to be.

  2. Price

    Parts and labor, for every option: refurbish, replace the part, or leave it.

  3. Decide

    Nothing starts without your say. If it is not worth fixing, we tell you.

One fault, or the whole grill

One thing has stopped working

A repair visit

We find the fault, price it and fix it. The parts we replace most:

  • Burners
  • Igniters
  • Valves
  • Heat plates
  • Cooking grates
  • Briquette trays
  • Knobs
  • Lighting
  • Gas fittings

Not sure which of these you need? That is what the estimate is for. When both make sense, we price both.

SDBBQ technician finishing a restored built-in grill

It has been neglected, or you inherited it that way

A full restoration

A full-service cleaning and a rebuild in one. Everything worn gets refurbished or replaced, and the grill comes back close to new.

5 to 6 hrstypical A fractionof a comparable new grill
“Their skilled team restored my Bull built-in grill and advised on cost-effective replacements. They saved me time and extended my grill's life.”
Tom Leddo
What a restoration covers
Burners, heat plates and briquettes back to bright steel after a restoration

Back close to new

Grill restoration

Some grills are not broken in one place. They have been neglected for years, or came with the house, and everything is a little bit wrong: burners rotted through, heat plates gone, knobs missing, an igniter that gave up long ago. You do not need a new grill for that. You need a restoration.

A restoration is a full-service cleaning and a rebuild in one. We take the grill down to its components and clean every part. Everything worn is then refurbished or replaced: burners, heat plates, grates, briquette trays, igniters, valves, knobs.

  • 5 to 6 hours on siteSome restorations need a second visit, scheduled around you
  • More than 100 parts vendorsIncluding models the maker stopped supporting
  • An estimate firstEvery option priced. Usually a fraction of a comparable new grill

Not sure yours is worth restoring? Send a photo of the whole grill and the worst of it. We will tell you what it most likely needs, free.

Doing some of it yourself first? Here is how to restore a rusty grill at home.

Send a photo for a price Call (858) 605-5777

An SDBBQ technician installing a new grill on a backyard patio

Is it worth repairing?

Repair or replace?

When one part has failed, such as a burner, an igniter or a valve, a repair is often all the grill needs. We can get parts for almost any grill, including models the maker stopped supporting.

Sometimes it is better to invest in a new one. If the repair would cost close to a new grill of the same quality, we say so. You get a price for each option, so you can compare them side by side and decide.

If you go with a new grill, buy it from us and the installation is free. We fit it into the island you have, with any island changes quoted separately, or set it up freestanding on the patio.

Send a photo for a price Built-in grills, fitted and installed

An SDBBQ technician holding a spark igniter module beside an old built-in grill

Parts we source and fit

Most built-in grill repairs come down to one part: a burner, an igniter, a valve, the cooking grates or the heat plates. We source them from more than 100 vendors, including grills whose makers no longer support them, and our technicians fit every part they bring, at your home. Not sure what you have? Send a photo of the rating plate, usually inside the door or on the back. The model number is often all we need.

Send a photo

If they made parts for it, we can usually get them

Grill brands we repair

Built-inor freestanding At your homenothing to haul 100+parts vendors

2,500+ Turbo, 2,400+ Bull and 1,900+ Lynx jobs since 2015, and parts for almost any grill.

See every brand we service

Don't see yours?Send a photo of the rating plate, inside the door or on the back. The model number is usually all we need to find the part. Send a photo
5.0 on Google · 200+ reviews

Ask the people whose grills we have fixed

Verified Google reviews from across San Diego County.

Our 25 year old BBQ looks like brand new thanks to Hugo from San Diego BBQ Cleaners. Hugo not only did an amazing job cleaning the BBQ, he was very friendly and courteous. Additionally, they repaired a burner and smoker tray. I would highly recommend San Diego BBQ Cleaners!

Dwight Navis San Diego · Google review

San Diego BBQ did a fantastic job! Mark cleaned up our beyond-trashed looking BBQ so it looked nearly new, and Dan came later the same day to install all the new parts — now it works as good as new. When the igniter module was determined bad, he quickly grabbed a replacement at the shop and finished shortly thereafter.
The whole job cost a fraction of buying new and saved us the hassle of replacing our cooktop. The only thing I would have liked was a heads-up that two people would be coming at different times – otherwise everything was excellent. Blake and his crew are total pros, and we highly recommend them!

Lou F San Diego · Google review

SD BBQ did a fantastic job giving new life to our 20 year old Gran Turbo from BBQs Galore. The box and outward appearance were in great shape but the burners weren’t heating in the back. Dan’s team came out and replaced all the burners and the igniter, completely cleaned the entire grill and, while here, replaced our fire pit ring that had rusted out over time. Our bbq looks and works like it is brand new at less than half the cost of a new grill and our fire pit is now working as it did originally. Highly recommend S.D. BBQ!

Ralph Tilley Google review

Exceptional service! Super clean, efficient with outstanding results. BBQ over 15 years old is now like new. They ID'd any parts needed to operate 1005 and fixed a few small items they found needed attention without any additional cost. The best!
HR in Santaluz

Herm Rosenman Google review

AOG needed repair and cleaning, SD BBQ was quick to respond, fair price, and did an excellent job, the grill is now running like new.

Jorge Zapatel Google review

I am extremely appreciative of the BBQ solution that San Diego BBQ came up with for me and my beautiful but perhaps obsolete grill.

After a competitor failed to locate three new burners and un-loosen a couple of valves, I called Trinna who not only has a very pleasant voice, but who immediately displayed a "can-do, we go the extra mile" attitude! She was resolute that with 15 years of BBQ deep-dive experience, there was a great chance that her expert, "Doctor" Dan, would save the day and allow my wife and I to contunue down the blissful road of succulant and tasty BBQ pork, chicken and gourmet steak burgers!

Dan arrived for his appoinment RIGHT ON TIME and came replete with his requisite Padre cap neatly in place. He proceeded to diagnose the problwm in short order. Within an hour, he used some real, old-fashioned "elbow grease" to knock those valves into working-shape, and then ran and fetched some brand-spanking new burners that fit perfectly.

Voila! We are back in business.......and thanks so much to Trinna and Dan for making this splendiferous outcome possible!

Gerald Gulick San Diego · Google review

They made Magic of my 25 year old Fire Magic grill. Reasonable pricing. Timely quotes and customer service. Purchased cleaning and tune up. Replaced all knobs. New cast iron burner, ignitor, and 3 new heat plates. Like new again. Highly recommend

Jim Markham Google review

Superior service! Thorough. Restoration of a BBQ that I thought needed to be replaced.
Go to for everything I do with grilling - period.
R Thomas

Robert Thomas Google review

We needed a repair done on our Lynx BBQ. San Diego BBQ Cleaners came out and immediately did the repair in a timely and efficient manner. Dan the technician stayed in contact prior to appointment which was really nice. We're very happy with the service and look forward to working with them again!

Tina Steele San Diego · Google review

Daniel was great.
Replaced the broken igniter and fixed the lights and installed the front plate after I broke stuff trying to replace the igniter using utube videos.
Thank you Daniel and SF BBQ

Robert Newkirk Google review

Dan, Blake, Drew, and the whole SD BBQ Cleaners team are the best BBQ professionals I have ever worked with! Communication is great, service is fast, and quality is high. Costs are fair and they only repair what is needed and will never try to upsell you on non-needed fixes. They have serviced our grills a few times now, and each repair have lasted forever since they got the job done right the first time. I highly recommend these guys, look no further.

DMX Google review

We had our BBQ restored like new. Service was fast and thorough. Service tech was knowledgeable and professional. Will definitely use this service again.

RHD Google review

Asked before a repair

Corroded igniter electrode at the end of a rusted burner in a Viking grill
Corroded igniter electrode on a Viking burner, from a repair in Encinitas

My grill will not light

Usually the ignition

It is one of the two repairs we do most, with burners. The usual cause is a worn or misaligned electrode, a failed spark module, a dead battery in the push-button starter, or wiring chewed by rodents. We test the spark, then adjust or replace whatever has failed.

Corroded Fire Magic burner with its gas ports crusted over and clogged
Clogged gas ports on a corroded Fire Magic burner, found in La Mesa

Only one burner lights

Usually a clogged burner

Its ports are clogged or rusted, its electrode has moved, or its valve has failed. We drill out the ports or replace the burner, reset the electrode, or replace the valve.

Control knobs removed from an American Outdoor Grill showing the lit LED bezels and valve stems
Lit control panel of an American Outdoor Grill (AOG) we repaired in Carlsbad

The knobs will not turn

Usually a seized valve

We free it up and lubricate it, or replace it if it is past that. A knob that is melted, rounded or broken gets replaced too.

Corroded gas pressure regulator and rusted fittings under a Bull Brahma grill
Corroded gas regulator under a Bull Brahma grill we repaired in North Park

My grill will not get hot

Often the regulator

A tripped or failed regulator, burner ports clogged with grease and rust, or a grill set up for the other gas: propane instead of natural gas, or the reverse. We test the regulator under pressure, clear the ports, and convert the grill to the right gas if it needs it.

Is it cheaper than a new grill?

A fraction of the cost

A restoration is not cheap, but it usually comes in well under a new grill of the same quality. The estimate shows you both, so you can see it for yourself.

How long does a restoration take?

5 to 6 hours, on site

Some full restorations need more than one visit. We schedule those around you.

Will I get an estimate first?

Always, for every option

Refurbish, replace the part, or leave it alone. Each one priced before work starts.

Which brands do you restore?

Most of them

Lynx, Bull, Fire Magic, Turbo, DCS, Viking, Twin Eagles, and plenty that are not on that list.

Will it cook like it used to?

Often like new

The aim is the performance it had the day it was bought.

Not sure what is wrong? Send a photo.

We reply with what it most likely is, whether it is worth fixing, and what happens next. Free.

The photos that help most

  • The whole grillHood open, from the front
  • The problem, close upWhatever looks burnt, rusted or broken
  • The rating plateIt has the model number. Often inside the door or on the back

Rather talk? (858) 605-5777

If you know it.
Add photos Tap to choose, or drag them here.
Up to five. JPG, PNG or HEIC straight from your phone.

Protected by reCAPTCHA. Google Privacy Policy and Terms of Service apply.

Tell us what it is doing.

A photo and two sentences is usually enough for us to tell you what it is and what happens next.

Send a photo or call (858) 605-5777

Carlsbad · Encinitas · Oceanside · San Marcos · La Jolla · Del Mar · Fallbrook · Rancho Santa Fe See all service areas

Grill repairPrice first, before any work Call us